MSI X2-109 v2 - Manual (Page 114)

B-12
M S-9265 Server
3.3 Creating a Second IM or IME Volume
The LSI Logic SAS controllers allow you to configure two IM or IME volumes. If one
volume is already configured, and if there are available disk drives, there are two
ways to add a second volume.
The first is as follows:
1. In the configuration utility, select an adapter from the Adapter List. Select the
RAID Properties
option. This will display the current volume.
2. Press C to create a new volume.
3. Continue with step 4 of the IM or IME creation procedure in the previous section
to create a second volume.
The other way in which to add a second volume is as follows:
1. On the Adapter List screen, use the arrow keys to select an LSI Logic SAS
adapter.
2. Press Enter to go to the Adapter Properties screen, shown in Figure 3.1.
3. On the Adapter Properties screen, use the arrow keys to select RAID Proper-
ties
and press Enter.
4. Continue with step 4 of the IM or IME creation procedure in the previous section
to create a second volume.
9265v1.0-B(LSI SAS RAID).p65 2008/5/15, 上午 11:44 12
PDF created with pdfFactory Pro trial version www.pdffactory.com