beautypg.com

Dynamic characteristics, Absolute maximum ratings, Dynamic characteristics absolute maximum ratings – Cirrus Logic CS5534-BS User Manual

Page 9

background image

CS5532/34-BS

DS755F3

9

DYNAMIC CHARACTERISTICS

18. The ADCs use a Sinc

5

filter for the 3200 Sps and 3840 Sps output word rate (OWR) and a Sinc

5

filter

followed by a Sinc

3

filter for the other OWRs. OWR

sinc5

refers to the 3200 Sps (FRS = 1) or 3840 Sps

(FRS = 0) word rate associated with the Sinc

5

filter.

19. The single conversion mode only outputs fully settled conversions. See Table 1 for more details about

single conversion mode timing. OWR

SC

is used here to designate the different conversion time

associated with single conversions.

20. The continuous conversion mode outputs every conversion. This means that the filter’s settling time

with a full scale step input in the continuous conversion mode is dictated by the OWR.

ABSOLUTE MAXIMUM RATINGS

(DGND = 0 V; See Note 21.)

Notes: 21. All voltages with respect to ground.

22. VA+ and VA- must satisfy {(VA+) - (VA-)}

≤ +6.6 V.

23. VD+ and VA- must satisfy {(VD+) - (VA-)}

≤ +7.5 V.

24. Applies to all pins including continuous overvoltage conditions at the analog input (AIN) pins.

25. Transient current of up to 100 mA will not cause SCR latch-up. Maximum input current for a power

supply pin is ±50 mA.

26. Total power dissipation, including all input currents and output currents.

WARNING: Operation at or beyond these limits may result in permanent damage to the device.

Normal operation is not guaranteed at these extremes.

Parameter

Symbol

Ratio

Unit

Modulator Sampling Rate

f

s

MCLK/16

Sps

Filter Settling Time to 1/2 LSB (Full Scale Step Input)

Single Conversion mode

(Notes 18, 19, and 20)

Continuous Conversion mode, OWR < 3200 Sps
Continuous Conversion mode, OWR

≥ 3200 Sps

t

s

t

s

t

s

1/OWR

SC

5/OWR

sinc5

+ 3/OWR

5/OWR

s
s
s

Parameter

Symbol Min Typ

Max

Unit

DC Power Supplies

(Notes 22 and 23)

Positive Digital

Positive Analog

Negative Analog

VD+

VA+

VA-

-0.3
-0.3

+0.3

-
-
-

+6.0
+6.0

-3.75

V
V
V

Input Current, Any Pin Except Supplies

(Notes 24 and 25)

I

IN

-

-

±10

mA

Output Current

I

OUT

-

-

±25

mA

Power Dissipation

(Note 26)

PDN

-

-

500

mW

Analog Input Voltage

VREF pins

AIN Pins

V

INR

V

INA

(VA-) -0.3
(VA-) -0.3

-
-

(VA+) + 0.3
(VA+) + 0.3

V
V

Digital Input Voltage

V

IND

-0.3

-

(VD+) + 0.3

V

Ambient Operating Temperature

T

A

-40

-

85

°C

Storage Temperature

T

stg

-65

-

150

°C

This manual is related to the following products: