beautypg.com

Vt100 terminal interface, Mechanical & environmental, Power – ADTRAN Tracer 2 x E1 User Manual

Page 56

background image

TRACER 2 x E1 User’s Manual

61280004L2-1C

Section 5 Specifications

46

Test Points ............................................ RSSI, QPSK Constellation

VT100 Terminal ................................... Menu-Driven User Interface, Control of the Remote End,

Password Protected (Optional), Event History

VT100 Terminal Interface

Data Rate ................................................ 9600 bps

Data Bits ................................................. 8

Parity ...................................................... None

Stop Bits ................................................. 1

Terminal Emulation................................ VT100

Mechanical & Environmental

Baseband Processor

Operating Temperature .......................... -25

°C to 65°C

Size ......................................................... 42.4 cm x 4.4 cm x 29.2 cm

Humidity ................................................. 95%, Non-condensing

Weight .................................................... 6 lbs (2.7 kg)

Rack RFC

Operating Temperature .......................... -40

°C to 65°C

Size ......................................................... 42.4 cm x 4.4 cm x 29.2 cm

Humidity ................................................. 95%, Non-condensing

Weight .................................................... 6 lbs (4.8 kg).

Mast Unit

Operating Temperature .......................... -40

°C to 65°C

Size ......................................................... 52.5 cm high x 22.5 cm diameter

Humidity ................................................. 100%

Weight .................................................... 18 lbs (8.1 kg).

Power

Input Voltage .......................................... 21 to 60 volts DC, either polarity referenced to ground

Power Consumption ............................... 30 watts

Connector ............................................... 3 pin DIN (AC adapter), 3 pin screw clamp terminal

block (DC)