Cirrus Logic CS4349 User Manual
Cs4349, Khz dac with volume control and 1 vrms @ 3.3 v, Features
Copyright
Cirrus Logic, Inc. 2013
(All Rights Reserved)
192-kHz DAC with Volume Control and 1 Vrms @ 3.3 V
Features
Advanced multibit delta–sigma architecture
101 dB dynamic range
-91 dB THD+N at 5.0 V
-84 dB THD+N at 3.3 V
24-bit conversion
Supports audio sample rates up to 192 kHz
Low-latency digital filtering
Single-ended analog output architecture
Automatic sample-rate range detection
Popguard
®
technology for control of clicks and
pops
– Hardware Popguard disable for fast
startups
Supports all standard serial audio formats
including time-division multiplexed (TDM)
+3.3 V or +5.0 V analog supply
+1.5 V to +5.0 V logic supplies for serial port
+3.3 V to +5.0 V control port interface
Control Port Mode Features
SPI™ and I²C
™
Modes
ATAPI mixing
Mute control for individual channels
Digital volume control with soft ramp
– 127.5 dB attenuation
– 1/2 dB step size
– Zero-crossing click-free transitions
PCM
Serial
Interface
Serial Audio Input
Right
Channel
Output
Left
Channel
Output
Reset
3.3 V to 5 V
Register/
Hardware
Configuration
Hardware or I
2
C/
SPI Control Data
1.5 V to 5 V
Internal Voltage
Reference
and Regulation
Interpolation
Filter with
Volume
Control
Interpolation
Filter with
Volume
Control
Multibit
Modulator
Multibit
Modulator
Le
ve
l T
ransla
tor
Lev
el Trans
la
to
r
Amp
+
Filter
Amp
+
Filter
Left and
Right Mute
Controls
External
Mute
Control
DAC
DAC
3.3 V to 5 V
APR ‘13
DS782F2
CS4349
Document Outline
- 1 Pin Description
- 2 Characteristics and Specifications
- 2.1 Recommended Operating Conditions
- 2.2 Absolute Maximum Ratings
- 2.3 DAC Analog Characteristics - Commercial (-CZZ)
- 2.4 DAC Analog Characteristics - Automotive (-DZZ)
- 2.5 Combined Interpolation and On-Chip Analog Filter Response
- 2.6 Switching Specifications - Serial Audio Interface
- 2.7 Switching Characteristics - Control Port - I²C Format
- 2.8 Switching Characteristics - Control Port - SPI Format
- 2.9 Digital Characteristics
- 2.10 Power and Thermal Characteristics
- 3 Typical Connection Diagram
- 4 Applications
- 5 Stand-Alone Operation
- 6 Control Port Operation
- 7 Register Quick Reference
- 8 Register Description
- 9 Filter Plots
- Figure 22. Stopband Rejection (Fast), all Modes
- Figure 23. Stopband Rejection (Slow), all Modes
- Figure 24. Single-Speed (Fast) Passband Detail
- Figure 25. Single-Speed (Slow) Passband Detail
- Figure 26. Double-Speed (Fast) Passband Detail
- Figure 27. Double-Speed (Slow) Passband Detail
- Figure 28. Quad-Speed (Fast) Passband Detail
- Figure 29. Quad-Speed (Slow) Passband Detail
- 10 Parameter Definitions
- 11 Package Dimensions
- 12 Thermal Characteristics
- 13 Ordering Information
- 14 Revision History