RADWAG PUE C indicator - Manual (Page 44)

EXI-01-04-06-14-GB - 44 -
• the program displays the following set of messages:
• upon completion of the start mass estimation process the scale shows
the parameter name:
• start mass estimation process may be interrupted at any time by
pressing key, the following message informs about abortion of a
process:
NOTICE:
If the start mass estimation takes more than 15 sec. the program displays
an error message , short sound signal is heard. Press key and
perform the adjustment again simultaneously maintaining as stable ambient
conditions as possible!
Save changes and return to weighing:
See point - 11.2. – return to weighing.