Inscriptions and pictograms, User menu, Hilo – RADWAG PUE C indicator User Manual
Page 17: Kg (g)
EXI-01-04-06-14-GB
- 17 -
9.
INSCRIPTIONS AND PICTOGRAMS
O.n. Inscription Description
1.
FIL
Filtering level
2.
PCS
Parts counting
3.
HiLo
+/- control in relation to reference mass
4.
Auto
Control and correction of zero indication of scale
5.
toP
Measurement of max. force influencing weighing pan
6.
Add
Totalizing
7.
Scale in autozero range (indication = precise zero)
8.
Result of measurement is stable (ready for readout)
9.
PCS
Scale in operating mode counting pieces
10.
kg (g)
Scale in operating mode weighing
11.
Net
Scale is tarred.
12.
Min
+/- control in relation to reference mass – setting lower
threshold or mass below first range
13.
OK.
+/- control in relation to reference mass: mass of load
between set threshold
14.
Max
+/- control in relation to reference mass – setting upper
threshold or mass above upper threshold.
10.
USER MENU
The menu is divided into 5 basic groups. Each group has its individual
name starting with the capital letter P.
P1 rEAd
P 1.1 Fil
|
2
P 1.2 Auto
|
YES
P 1.3 tArA
|
no
P 1.4 Fnnd
|
no
P2 Prnt
P2.2 S_Lo
|