RADWAG PUE C indicator - Manual (Page 33)

EXI-01-04-06-14-GB - 33 -
3. If a single element weight is not greater than a reading unit, then
message is shown on the scale display (see point 19. Error
Messages), short sound signal is heard, next the scale returns to
weighing.
Function deactivation:
Press F key twice.
14.4. +/- control referring to the inscribed standard mass
The program allows entering checkweighing threshold values (Min, Max.
Procedure:
• Enter function (first make the operation mode accessible -
see point 14.1):
• The program proceeds to window for setting the lower threshold (Min):
Select the digit to be set
Select the digit value