RADWAG PUE C indicator - Manual (Page 26)

EXI-01-04-06-14-GB - 26 -
13.3. Tare function operation
This function enables the user to set appropriate parameters (depending on
needs) for tare function.
Procedure:
• Following point 11 of this manual enter submenu, next:
tArA
AtAr - automatic tare function on - stored in scale memory
after unplugging it from mains (see point 15.5 for
description);
tArA no - automatic tare function off (scale tarring by means of
T key )
tArA tArF - tare memory function – stores last value of tare in
scale memory. It is automatically displayed after
starting the scale.
Return to weighing:
See point - 11.2. – return to weighing.