RADWAG PUE C indicator - Manual (Page 35)

EXI-01-04-06-14-GB - 35 -
14.5. Per cent deviation with reference to standard mass
This program allows to measure deviation in per cent with reference to a
standard mass. The standard mass can be estimated by weighing (PrcA
function) or inscribed by a user (PrcB function).
14.5.1. Mass standard weight determined by the measuring process
Procedure:
• Enter function (first make the operation mode accessible -
see point 14.1):
• Message is displayed, the following window is seen:
• On a weighing pan place the load, mass of which is to be taken as a
standard, upon stabilization of the indication (symbol displayed)
press key for confirmation,
• The scale display shows indication 100,000%,
• From this moment display will indicate weight deviation of load placed
on a pan, wherein the said deviation is referred to the mass of
standard (in %):
Blinking symbol