Setting a basic weighing unit, Setting of basic unit for weighing – RADWAG PUE C indicator User Manual
Page 22
EXI-01-04-06-14-GB
- 22 -
12.5. Setting a basic weighing unit
The user may set a weighing unit to be active after turning on the scales.
Procedure:
• Following point 11 of this manual enter
• Press
key several times to view available units:
Selection:
A. When the basic unit is set to [kg], users can toggle between: [kg, lb,
N]. For verified scales [lb] is not accessible.
B. When the basic unit is set to [g], users can toggle between: [g, ct].
For verified scales [lb] is not accessible.
• Upon unit selection press
key, wait for the scales to return to the
following window:
This manual is related to the following products: