RADWAG PUE C indicator - Manual (Page 15)

EXI-01-04-06-14-GB - 15 -
In case of any problems with appropriate operation of the indicator, contact
the manufacturer’s service centre or any service centre authorised by
RADWAG.
In case of any fault or dysfunction the device should be passed to the
manufacturer’s service centre or, if this is not possible, the fault should be
reported in order to settle the conditions of repair.
Any intrusion (alteration, repair etc.) in the indicator or scale
based on PUE C/31H/EX indicator, by unauthorised persons
will cause a forfeiture of validity of certificates, declarations
and manufacturer’s warranty.
6.
FUNCTIONS
• Filtering
• Autozero
• Minimal mass
• Counting pieces
• +/- control
• Deviation in per cents
• Peak hold
• Automatic tare
• Tare memory
• Manual tare inscription
• User’s calibration
• Totalizing
It is possible to disable selected functions thus making the scales adjusted
to one’s own needs. Access may be permitted to some particular functions
only if required. The user menu allows enabling/disabling a given
parameter, see the further part of the manual.