Determining the minimal load, Operation modes, Enabling operating modes (functions) – RADWAG PUE C indicator User Manual
Page 28: Determining the minimal mass
EXI-01-04-06-14-GB
- 28 -
13.5. Determining the minimal load
S_Lo parameter works for automatic tare.
The rule is that no automatic tare is performed until the indication drops
below S_Lo value (gross).
Procedure:
• Following point 11 of this manual enter
Return to weighing:
See point - 11.2. – return to weighing.
14.
OPERATION MODES
14.1. Enabling operating modes (functions)
In this group of parameters users declare functions they want to use after
pressing F key -
while in weighing mode.
Procedure:
• Following point 11 of this manual enter
Select the digit to be set
Select the digit value
This manual is related to the following products: