RADWAG PUE C indicator - Manual (Page 20)

EXI-01-04-06-14-GB - 20 -
Select the digit value
Select the digit to be set
function pay attention to maximum weighing range, it cannot be exceeded.
After removing the load and the package, display shows indication of sum
of tarred weights with minus sign.
NOTICE:
Tarring may not be performed when minus value or zero is displayed. In
such a case the display shows message, short sound signal is
heard.
12.2. Tarring by inscribing tare value
It is possible to inscribe a tare value.
Procedure:
• Press simultaneously
and keys
• On the display you will see:
– select the digit to be set
– select the digit value
• Using
and keys set tare value,
• Press
,
• The scale returns to the weighing mode and the value of tare is
displayed with the “–“ sign,
• Tare value can be inscribed any time in weighing mode.