WIKA CPH62I0 - Manual (Page 30)

30 WIKA operating instructions, model CPH62I0
11221801.02 02/2011 GB/D/F/E
GB
6. Commissioning, operation
clear all recordings clear nothing
(cancel menu)
clear the last recording
sequence
The selection can be made with the ´MAX´ key and ´MIN´ key. The ´STORE/QUIT´ key
confirms the selection.
6.5 The serial interface
WARNING!
The serial interface is not allowed to be operated in hazardous areas.
For data transfer to a computer there are two electrically-isolated interface adapters
available (see price list calibration technology) for connection to a RS-232 or USB inter-
face (USB-driver necessary).
(See calibration technology price list: Data logger evaluation software GSoft.)
Clearing data:
When the ´STORE/QUIT´ key is pressed for 2 seconds, the logger operation will be
selected.
The display will show:
By briefly pressing the ´MAX´ key or ´MIN´ key, the display will change to:
When ´STORE/QUIT´ is pressed, the choice for clearing the logger memory will be
displayed: