WIKA CPH62I0 - Manual (Page 20)

20 WIKA operating instructions, model CPH62I0
11221801.02 02/2011 GB/D/F/E
GB
6. Commissioning, operation
(2 sec)
Read*
Logg
(ring - shift)
Set
Cloc
Set**
Logg
Set
AL
Set
CAL
Set
Conf
Stored data*
Recall of individually logged data and respective
time stamp (´Func-STOR´ configuration (see
chapter “6.4 Operation of logger”).
Configuration
Unit** / Sea-Level** / Measuring rate** /
Power-off / interface-address
Alarm
Min/Max alarm visual
Calibration
Adjustment of zero and span
Logger**
Switch from simple ‘Hold’ to ‘Logger’ function:
Single-point values (STOR) or Cyclic (CYCL)
set parameter next parameter store & quit
System-clock
time / day & month / year
6.2 Main menu
* appears only if data (Func-STOR) is in the logger memory.
** appears only if the logger memory is empty (see chapter “6.4 Operation of logger”).