WIKA DPT-10 User Manual

Page 80

Seal material

Temperature limits

FKM, cleaned for oxygen application

-10 … +60 °C (-4 … +140 °F)

PTFE, cleaned for oxygen application

-20 … +60 °C (-4 … +140 °F)

Process pressure limits

Nominal range

Nominal pressure

Overload unilateral

Overload bilateral

10 mbar (1 kPa)

160 bar (16000 kPa)

240 bar (24000 kPa)

30 mbar (3 kPa)

160 bar (16000 kPa)

240 bar (24000 kPa)

100 mbar (10 kPa)

160 bar (16000 kPa)

240 bar (24000 kPa)

500 mbar (50 kPa)

160 bar (16000 kPa)
420 bar (42000 kPa)

240 bar (24000 kPa)
630 bar (63000 kPa)

3 bar (300 kPa)

160 bar (16000 kPa)
420 bar (42000 kPa)

240 bar (24000 kPa)
630 bar (63000 kPa)

16 bar (1600 kPa)

160 bar (16000 kPa)
420 bar (42000 kPa)

240 bar (24000 kPa)
630 bar (63000 kPa)

40 bar (4000 kPa)

160 bar (16000 kPa)
420 bar (42000 kPa)

Plus side: 160 bar
(16000 kPa)
420 bar (42000 kPa)
Minus side: 100 bar
(10000 kPa)

240 bar (24000 kPa)
630 bar (63000 kPa)

Min. system pressure with all measuring
ranges

0.1 mbar

abs

(10 Pa

abs

)

Vibration resistance

mechanical vibrations with 4 g and 5 … 100 Hz

19)

Shock resistance

Acceleration 100 g/6 ms

20)

Electromechanical data - version IP 66/IP 67

Cable entry/plug

21)

Single chamber housing

1 x cable gland M20 x 1.5 (cable: ø 5 … 9 mm),
1 x blind stopper M20 x 1.5

or:

1 x closing cap ½ NPT, 1 x blind plug ½ NPT

or:

1 x plug (depending on the version), 1 x blind
stopper M20 x 1.5

19)

Tested according to the directives of the German Lloyd, GL directive 2. Not
in the case of double chamber housing of precision cast stainless steel.

20)

Tested according to EN 60068-2-27.

21)

Depending on the version M12 x 1, according to DIN 43650, Harting, 7/
8" FF.

Diﬀerential pressure transmitter DPT10 - metal measuring diaphragm • Proﬁbus PA

11 Supplement

37245

-EN

-100120