WIKA DPT-10 - Manual (Page 17)

+ –
1
2
3 3
5 5
6 6
7
4
Fig. 11: Measurement setup, flow measurement in vapours
1 Condensate vessels
2 Orifice or impact pressure probe
3 Blocking valves
4 DPT10
5 Precipitator
6 Drain valves
7 3 -fold valve block
à Mount DPT10 below the measurement loop so that the effective
pressure lines are always filled with liquid and gas bubbles can
bubble up to the process line
à For measurements in products with solid content such as e.g. dirty
liquids, the installation of separators and drain valves is
recommended to enable collection and removal of debris and
sediment.
à Fill the effective pressure lines to the height of the condensate
vessels before setup
In liquids
Differential pressure transmitter DPT10 - metal measuring diaphragm • Profibus PA 17
4 Mounting
37245
-
EN
-100120