Kramer Electronics VS-848 - Manual (Page 26)

Operating VS-808xl Matrix Switcher
23
7 Operating VS-808xl Matrix Switcher
Operate your VS-808xl via:
The front panel buttons
RS-232/ RS-485 serial commands transmitted by a touch screen
system, PC or other serial controller
7.1 Displaying Unit Characteristics
The VS-808xl 7-segment Display shows the selected audio 1 or video 2 input
switched to the marked output.
The unit characteristics
3 are displayed in the following circumstances:
Immediately (and automatically) after switching on the power;
and
When simultaneously pressing and holding for 3 seconds the “IN”
buttons 1, 2 and 3
7.2 Selecting and Connecting an Output and/or Input
To select an output or input simply press the designated button on the front
panel. These buttons correspond to output connections as marked on the rear
panel.
To connect a video/audio input to a specific output, press the
desired output button, followed by the desired input button
To disconnect a video/audio input from a specific output, press the
desired output button followed by the OFF button. To disconnect
all the outputs, press the ALL button, followed by the OFF button
To connect a video/audio input to all outputs, press the ALL
button followed by the INPUT button corresponding to the input
which is to be routed to all the outputs
1 When the Audio button illuminates, that is, when the audio breakaway mode is selected
2 When the Video button illuminates, that is, when the video breakaway mode is selected
3 Machine model and software version