Kramer Electronics VS-5x5 - Manual (Page 19)

16 VS-5x5 - Operating the VS-5x5
2. Press an IN button (1, 2, 3, 4 or OFF).
The selected input switches to the selected output.
For example, press the ALL button and then IN button # 2 to connect input # 2 to
all the outputs.
7.4 Confirming Settings
Choose to work in the AT ONCE or the CONFIRM mode. When the VS-5x5
operates in the AT ONCE mode (TAKE button is not lit), pressing an OUT-IN
combination implements the switch immediately. In the CONFIRM mode (TAKE
button is lit), the TAKE button must be pressed to authorize the switch.
In the AT ONCE mode, execution is immediate and actions require no user
confirmation. However, no protection is offered against changing an action in
error.
In the CONFIRM mode:
•
You can key-in several actions and then confirm them by pressing the TAKE
button, to simultaneously activate the multiple switches
•
Every action requires user confirmation, protecting against erroneous
switching
•
Execution is delayed until the user confirms the action. Failure to press the
TAKE button within one minute (the Timeout) returns abort the action
7.4.1 Toggling between the AT ONCE and CONFIRM Modes
To toggle between the AT ONCE and CONFIRM modes, do the following:
1. Press the dim TAKE button to toggle from the AT ONCE mode (in which the
TAKE button is dim) to the CONFIRM mode (in which the TAKE button
illuminates).
Actions now require user confirmation and the TAKE button illuminates.
2. Press the illuminated TAKE button to toggle from the CONFIRM mode back
to the AT ONCE mode.