Kramer Electronics VS-5x5 - Manual (Page 18)

VS-5x5 - Operating the VS-5x5 15
7.2 Choosing the Audio-Follow-Video or Breakaway Option
You can switch stereo audio signals in one of two ways, either:
•
Audio-follow-video (AFV), where all operations and status indicators relate to
both the video and the audio channels or
Audio and video connections are the same
•
Breakaway, where video and audio channels switch independently
7.2.1 Setting the Audio-Follow-Video Option
To set the audio-follow-video (AFV) option:
1. Press the AFV button.
The AFV button illuminates. The audio follows the video.
ƒ If the audio configuration differs from the video configuration, the audio
input(s), to be changed, flash in the 7-segment display and the AUDIO
and TAKE buttons also flash.
Warning that changes are about to occur in the audio section
2. Press the TAKE button to confirm the modification (reconfiguring the audio
according to the video).
7.2.2 Setting the Breakaway Option
To set the breakaway option, press either the AUDIO (for audio control only) or the
VIDEO (for video control only) button.
•
If the AUDIO button illuminates, all switching operations, and the
7-segment display, relate to the audio section
•
If the VIDEO button illuminates, all switching operations, and the
7-segment display, relate to the video section
7.3 Switching OUT-IN Combinations
To switch a video/audio input to a video/audio output, do the following:
1. Press an OUT button (1, 2, 3, 4 or ALL).
The 7-segment display flashes.