1 toggling between the at once and confirm modes, 2 confirming a switching action, 4 storing/recalling input/output configurations – Kramer Electronics VP-8x8AK User Manual
Page 26: Toggling between the at once and confirm modes, Confirming a switching action, Storing/recalling input/output configurations, Section
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VP-8x8AK
22
7.3.1 Toggling between the At Once and Confirm Modes
To toggle between the At Once and Confirm modes, do the following:
1. Press the TAKE button to toggle from the At Once mode (in which the
TAKE button does not illuminate) to the Confirm mode (in which the
TAKE button illuminates).
Actions now require user confirmation and the TAKE button illuminates.
2. Press the illuminated TAKE button to toggle from the Confirm mode
back to the At Once mode.
Actions no longer require user confirmation and the TAKE button no
longer illuminates.
7.3.2 Confirming a Switching Action
To confirm a switching action (in the Confirm mode), do the following:
1. Press an OUT-IN combination.
The corresponding 7-segment display blinks with the new value. The
TAKE button also blinks.
2. Press the blinking TAKE button to confirm the action.
The corresponding 7-segment display no longer blinks. The TAKE button
illuminates.
To confirm several actions (in the Confirm mode), do the following:
1. Press each OUT-IN combination in sequence.
The corresponding 7-segment display blinks. The TAKE button also
blinks.
2. Press the blinking TAKE button to confirm all the actions.
The corresponding 7-segment display no longer blinks. The TAKE button
illuminates.
7.4
Storing/Recalling Input/Output Configurations
You can store and recall up to 16 input/output configuration setups
1
using the
eight OUT buttons and the eight IN buttons, as
1
5
2
6
3
7
4
8
12
15
9 10
13
16
11
14
Figure 14: Storing and Recalling using the Input/Output Buttons
1 You can store and recall audio and video configurations and audio gain data