Kramer Electronics VP-31KSi - Manual (Page 33)

Table of ASCII Codes for Serial Communication (Protocol 3000)
29
12 Table of ASCII Codes for Serial Communication (Protocol
3000)
Table 9 lists the ASCII values to switch an input to an output for a single
VP-31KSi device. For more detailed information, see Protocol 3000 Section 14.2 .
Table 9: VP-31KSi Video and Audio Signal Codes
Video Audio
IN 1 #V 1>1 CR #A 1>1 CR
IN 2 #V 2>1 CR #A 2>1 CR
IN 3 #V 3>1 CR #A 3>1 CR
Table 10 lists the codes that set the audio input gain. For more detailed
information, see Section 14.2 .
Table 10: VP-31KSi Audio Input Gain Codes
INPUT 1 INPUT 2 INPUT 3 Level [Rel]
#AUD-LVL 1,1, -63CR #AUD-LVL 1,2, -63CR #AUD-LVL 1,3, -63CR -63dB
#AUD-LVL 1,1, -50CR #AUD-LVL 1,2, -50CR #AUD-LVL 1,3, -50CR -50dB
#AUD-LVL 1,1, 0CR #AUD-LVL 1,2, 0CR #AUD-LVL 1,3, 0CR 0dB
#AUD-LVL 1,1, 7CR #AUD-LVL 1,2, 7CR #AUD-LVL 1,3, 7CR +7dB (Max)
Table 11 lists the codes that set the video and audio output gain. For more detailed
information, see Section 14.1.2 .
Table 11: VP-31KSi Audio and Audio Output Gain Codes
OUTPUT 1
Level
[Rel]
#AUD-LVL 2,1, -30CR -30dB
#AUD-LVL 2,1, 0CR 0dB
#AUD-LVL 2,1, 20CR +20dB
13 Table of Hex Codes for Serial Communication (Protocol 2000)
Table 12 lists the Hex values to switch an input to an output for a single VP-31KSi
machine. For more detailed information, see Protocol 2000
20F
1 (see Section 14.3 ).
1 Go to the Technical Support section of our Web site at http://www.kramerelectronics.com