Kramer Electronics VP-31KSi - Manual (Page 27)

Operating the VP-31KSi Remotely using a Web Browser
23
8.2.1 Switching an Input to an Output
To switch an input to an output (for example, input 4 to output 1):
1. Click on the dark blue AFV mode button. (To switch only the video or audio
channel, click on purple Audio or blue Video button respectively.)
The border of the button turns dark.
2. Click on the switching point within the matrix (In 2 to Out 1).
The audio/video signal indicators move to the In 2 to Out 1 switching matrix
box, indicating that In 2 is now switched to Out 1.
Figure 17: Switching an Input to an Output
8.2.2 Operating in the Confirm Mode
By default, the device is set to the At-Once mode.
To operate in the Confirm mode:
1. Click the red Offline button.
The border of the button turns dark.
2. Click the desired switching-point in the switching matrix.
Audio/video indicator outlines appear on the matrix and the Take and Cancel
buttons turn blue.
Figure 18: Switching an Input to an Output