8 controlling a remote rs-232 device, Controlling a remote rs-232 device, Figure 10: cascading up to eight vp-31ksi devices – Kramer Electronics VP-31KSi User Manual
Page 19: N 5.8, Figure 10
Connecting the VP-31KSi 3x1 UXGA/Audio STEP-IN Switcher
15
Figure 10: Cascading up to Eight VP-31KSi Devices
Note: The video acceptor must be connected to the Master output. The outputs of
all other devices may be connected to any input on the subsequent device.
5.8 Controlling a Remote RS-232 Device
Use the Kramer K-Config software
A computer running the K-Config software can be connected to the VP-31KSi via
either the “To Projector” serial or the Ethernet ports.
to define macros sent from the “To Projector”
RS-232 port to remote RS-232 serial devices (for example, a projector). For
instructions on using the K-Config software, see the K-Config software guide.
You can configure the “To Projector” RS-232 port command macros to send any
data on one of the two possible triggers:
1 Download the latest version fro