Kramer Electronics VP-31KSi - Manual (Page 26)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VP-31KSi Remotely using a Web Browser
22
3. Click Run.
The main switching control Home page is displayed which shows a graphical
interpretation of the front panel (see Figure 16 ).
The Web pages let you control the VP-31KSi via the Ethernet. The menu appears
on the left side of the screen. There are three remote operation Web pages:
• The switching matrix (see Section 8.2 )
• Audio gain control (See Section 8.3 )
• Configuration (See Section 8.4 )
A description of each Web page is displayed if you hover your mouse over the
question mark
that appears on the left side of the screen.
8.2 The Switching Matrix Page
The VP-31KSi switching matrix page lets you route any of the three inputs to the
output by clicking the audio and/or video signal indicators (purple and blue,
respectively).
Figure 16: VP-31KSi Switching Matrix Page
You can perform the following operations via this Web page:
• Operate in the AFV mode or switch the audio and video separately, by
clicking the Audio, Video or AFV buttons (see Section 8.2.1 )
• Select an audio and/or video signal 1
• Operate in the At Once or Confirm mode (see Section
by clicking that signal indicator
8.2.2 )
• Click the lock icon to lock or unlock the front panel
1 Depending on the operation mode (Audio, Video or AFV)