Kramer Electronics VP-28 - Manual (Page 30)

26 VP-28 - Technical Specifications
8 Technical Specifications
INPUTS: Video:
3 Composite video on RCA connectors
3 HDMI on HDMI connectors
2 DP on DisplayPort connectors
3 PC/DVI on DVI connectors
Audio:
1 Microphone on an XLR connector
1 Microphone on a 6.3mm phone jack connector (3mV / 10kΩ
condenser/dynamic)
3 Unbalanced stereo audio on 3.5mm mini jack connectors (for CV)
3 Unbalanced stereo audio on 3.5 mini jack connectors (for HDMI)
2 Unbalanced stereo audio on 3.5mm mini jack connectors (for DP)
3 Unbalanced stereo audio on 3.5mm mini jack connectors (for PC audio)
3 Unbalanced stereo audio on 3.5mm mini jack connectors (for DVI)
OUTPUTS: Video:
1 Composite video on an RCA connector
1 HDMI on an HDMI connector
1 DP on a DisplayPort connector
1 PC/DVI on a DVI connector
Audio:
1 Unbalanced stereo audio on a 3.5mm mini jack connector (for CV)
1 Unbalanced stereo audio on a 3.5 mini jack connector (for HDMI)
1 Unbalanced stereo audio on a 3.5mm mini jack connector (for DP)
1 Unbalanced stereo audio on a 3.5mm mini jack connector (for PC audio)
1 Unbalanced stereo audio on a 3.5mm mini jack connector (for DVI)
1 Master balanced stereo audio on a 5-pin terminal block
VIDEO AUDIO
MAX. OUTPUT
LEVEL:
CV: 1.7Vpp
XGA: 2.3Vpp
Master: 17Vpp from Mic, 12.4Vpp from Line in
Local Out: 8.8Vpp from line inputs
BANDWIDTH
(-3dB):
CV: 680MHz
XGA: 290MHz
(–4dB 400MHz)
>25kHz
DIFF. GAIN: CV: 2.5%
XGA: 0.1%
DIFF. PHASE: CV: 0.4 Deg.
XGA: 0.1 Deg.
K-FACTOR: CV: <0.05%
XGA: <0.05%
S/N RATIO: CV: 74dB
XGA: 71dB @5MHz
Master: 81dB from Mic (@20mVpp input, 17Vpp
output diff, “A” weighting, XLR microphone)
90 to 95dB from Line in (“A” weighting)
Local Outputs: 110dB (“A” weighting)
CROSSTALK
@1kHz (all
hostile):
CV: –54dB
XGA: –56dB (5MHz)
Master: –70dB
Local Outputs: –80dB from Line in
CONTROLS
(Level Range):
MASTER: <–12 to 70dB from Mic, –79 to +15dB from Line in
COUPLING: CV: DC
XGA: DC
AC