2 connecting to the vp-28 via ethernet, 1 connecting the ethernet port directly to a pc, Connecting to the vp-28 via ethernet – Kramer Electronics VP-28 User Manual
Page 15

VP-28 - Connecting the VP-28
11
11
5.2
Connecting to the VP-28 via Ethernet
You can connect the
VP-28 via Ethernet via either of the following methods:
•
A crossover cable (see
Section 5.2.1
) for direct connection to the PC
•
A straight through cable (see
Section 5.2.2
) for connection via a network hub
or network router
After connecting the Ethernet port, you have to install and configure your Ethernet
Port. For detailed instructions, see the Ethernet Configuration Guide (Lantronix) in
the technical support section on our Web sit
5.2.1
Connecting the Ethernet Port directly to a PC
You can connect the Ethernet port on the
VP-28 to the Ethernet port on your PC
via a crossover cable with RJ-45 connectors. This type of connection is
recommended for identification of the factory default IP Address of the
VP-28
during the initial configuration.
To configure your PC after connecting the Ethernet port:
1. Right-click the
My Network Places icon on your desktop.
2. Select
Properties.
3. Right-click
Local Area Connection Properties.
4. Select
Properties.
The
Local Area Connection Properties window appears.
5. Select the
Internet Protocol (TCP/IP) and click the Properties Button.