Kramer Electronics VP-28 - Manual (Page 21)

VP-28 - Operating the VP-28 Remotely 17 17
7 Operating the VP-28 Remotely
You can operate the VP-28 remotely using the VP-28 Controller Software via
either the RS-232 serial port or the Ethernet port.
The VP-28 Application Software can be downloaded from
http://www.kramerelectronics.com .
The Controller Software requires the following:
• Windows™ XP, Vista or Windows™ 7
• Microsoft .Net Framework version 3.5
To install the Controller Software, download the software and run the setup file.
After installation, running the Controller Software for the first time displays a
window similar to that shown in
Figure 8 .
Figure 8: Controller Software Main Window