Kramer Electronics TP-410 - Manual (Page 29)

26 TP-410 - Technical Specifications
11.1 Communication Parameters
EDID
EDID data is passed to the local Input
RS-232
Protocol 2000
Baud Rate: Up to 19200
Data Bits: 8
Stop Bits: 1
Parity: None
Command Format: HEX
Ethernet
Default Settings Factory Reset Settings
IP Address: 192.168.1.39 Power cycle the unit while pressing the Factory Reset
button, located on the rear panel of the unit.
The unit will reset to its factory default definitions: default
Ethernet settings; RS-232 data is distributed to all 10
outputs and is received by output 1 and default EDID is
restored (see
Section 12
TCP Port #: 5000
)
UDP Port #: 50000