beautypg.com

3 ethernet port configuration, Figure 5: local area connection properties window, Figure 5 – Kramer Electronics TP-410 User Manual

Page 16

background image

TP-410 - Connecting the TP-410

13

13

Figure 5: Local Area Connection Properties Window

6. Select Use the following IP Address, and fill in the details as shown in

Figure 6

.

7. Click OK.

Figure 6: Internet Protocol (TCP/IP) Properties Window

5.4.2 Connecting the ETHERNET Port via a Network Hub (Straight-Through

Cable)

You can connect the Ethernet port of the TP-410 to the Ethernet port on a network

hub or network router, via a straight-through cable with RJ-45 connectors.

5.4.3 Ethernet Port Configuration

To configure the Ethernet parameters, set DIP-switches 1 to 4 to ON (ON-ON-ON-

ON), turn the power off and then back on.

See also other documents in the category Kramer Electronics Accessories for electrical: