Kramer Electronics TP-410 - Manual (Page 19)

16 TP-410 - Configuration and Distribution of Control Data
Figure 8: Local Control via RS-232
6.1.2 Connecting a PC via the Ethernet
In this example, a computer graphics source is connected via a transmitter to the
TP IN RJ-45 connector. Outputs 1, 4 and 5 are connected to TP-126 units. The
system is controlled by a laptop via the Ethernet. The machines in this
configuration are identified by their address number and output location, as
illustrated in Figure 9 .
Figure 9: Control via the Ethernet