3 overview, Overview – Kramer Electronics TP-124 User Manual
Page 7
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Overview
4
3
Overview
This user manual describes the following Kramer TOOLS:
•
TP-104/TP-104HD XGA Line Transmitter/DA is a line
transmitter/1:4 DA that receives an XGA signal and transmits it
over four CAT 5 cables to appropriate receivers (see section
•
TP-105/TP-105(HD) CAT 5 Line Driver/DA receives a CAT 5
input
and distributes it to two identical outputs (see section )
•
TP-121 XGA/Audio Line Transmitter and the TP-122 XGA/Audio
•
TP-123 XGA/Audio/Data Line Transmitter and the TP-124
XGA/Audio/Data Line Receiver (see section
This section describes:
•
Using shielded twisted pair (STP)/unshielded twisted pair (UTP),
•
The power connect feature, see section
•
Recommendations for achieving the best performance, see section
3.1 Shielded Twisted Pair (STP)/Unshielded Twisted Pair (UTP)
We recommend that you use Shielded Twisted Pair (STP) cable. There are
different levels of STP cable available, and we advise you to use the best
quality STP cable that you can afford. Our non-skew-free cable, Kramer
BC-STP is intended for analog signals where skewing is not an issue. For
cases where there is skewing, our UTP skew-free cable, Kramer BC-XTP,
may be used. Bear in mind, though, that we advise using STP cables where
possible, since the compliance to electromagnetic interference was tested
using those cables.
Although Unshielded Twisted Pair (UTP) cable might be preferred for long
range applications, the UTP cable should be installed far away from electric
cables, motors and so on, which are prone to create electrical interference.
However, since the use of UTP cable might cause inconformity to
electromagnetic standards, Kramer does not commit to meeting the standard
with UTP cable.
1 Video only