Kramer Electronics TP-124 - Manual (Page 10)

Your TP-104/TP-104HD XGA Line Transmitter/DA
7
7
Table 1: TP-104, TP-104HD XGA Line Transmitter/DA Features
# Feature Function
1 12V DC +12V DC connector for powering the unit
2 OUT 4 RJ-45 connector Connects to 1 the LINE IN RJ-45 connector on the TP-122 XGA/Audio Line
Receiver or the TP-120 XGA Line Receiver 2
3 OUT 3 RJ-45 connector Connects to 1 the LINE IN RJ-45 connector on the TP-122 XGA/Audio Line
Receiver or the TP-120 XGA Line Receiver 2
4 OUT 2 RJ-45 connector Connects to 1 the LINE IN RJ-45 connector on the TP-122 XGA/Audio Line
Receiver or the TP-120 XGA Line Receiver 2
5 OUT 1 RJ-45 connector Connects to 1 the LINE IN RJ-45 connector on the TP-122 XGA/Audio Line
Receiver or the TP-120 XGA Line Receiver 2
6 INPUT 15-pin HD (F) connector Connect to the XGA source
7 ON LED Illuminates when receiving power
Figure 3 and Table 2 define the TP-104 and TP-104HD underside panel:
Figure 3: TP-104 (Underside Panel)
Table 2: TP-104 (Underside Panel) Features
# Feature Function
1 VS Switch Slide the switch up (to NORMAL) to retain the polarity
Slide the switch down 3 to change the VS polarity to NEGATIVE polarity 4
2 HS Switch Slide the switch up (to NORMAL) to retain the polarity
Slide the switch down 3 to change the HS polarity to NEGATIVE polarity 4
1 Using a UTP CAT 5 cable with RJ-45 connectors at both ends (the PINOUT is defined in Table 12 and Figure 14 )
2 Refer to the separate user manual: PT-110, WP-110, PT-120, TP-120, which can be downloaded at
http://www.kramerelectronics.com . Also, see the example illustrated in Figure 17
3 By default, both switches are set to NORMAL
4 Downward syncs