Festo Контроллер двигателя SEC-ST - Manual (Page 33)

1. System summary
1−11
Festo SEC−ST−48−6−P01−EN en 0606c
Step designation Number of steps per revolution
1/1 step 200
1/2 step 400
1/4 step 800
1/5 step 1000
1/8 step 1600
1/10 step 2000
1/32 step 6400
With a PLC from Festo (SPC200):
If actuation is made with a PLC from Festo (SPC200), only 1/1,
1/2, 1/4, 1/5, 1/8 and 1/10 of a step will be supported.
Please note
If 1/32 of a step is used, this will result in other positioning
paths.