Festo Контроллер крайних положений SPC11 - Manual (Page 29)

2. Parameters of the SPC11 for the DSMI−...
2−3
Festo P.BE−SPC11−DSMI−EN en 0910b
2.1 Parameters of the SPC11
Warning
Incorrectly set parameters can damage the fixed stops and
the drive.
Be very careful when setting the parameters.
The SPC11 must be familiar with certain conditions of use.
These conditions of use are described by the following three
parameters, which must be entered directly on the SPC11:
Parameters Display Manual
Amplification stage Influences the acceleration
behaviour of the drive.
Cushioning stage Influences the retracting beĆ
haviour when moving to the
end positions and intermediĆ
ate positions.
System parameters Characteristic value for the
design of the drive.
These amplification and cushioning stages are matched
exactly to certain valve−drive combinations and mass loads
for horizontal operation.
You can set the amplification and cushioning stages valid for
your application, as well as the system parameters, with the
keys on the SPC11 (see system manual).