Festo Контроллер крайних положений SPC11 - Manual (Page 11)

Contents and general instructions
IX
Festo P.BE−SPC11−DSMI−EN en 0910b
Product−specific terms and abbreviations
The following product−specific abbreviations are used in this
manual:
Term/
abbreviation Meaning
Amplification stage The amplification stage influences e.g. the acceleration behaviour of the
drive. The amplification stage should usually be set in accordance with the
specifications in the manual Drive−specific supplement". If it is necessary to
optimize the positioning behaviour, only the cushioning stage should be
modified.
Cushioning stage The positioning behaviour is determined by the amplification and cushioning
stages. The cushioning stage serves for optimizing the starting behaviour
when movement is made towards the end positions.
Drive In this manual the term "Drive" represents the terms "linear unit"
(DGP(I)(L)−...), "cylinder" (DNC−...) or "rotary drive" (DSMI).
I Digital input
O Digital output
Parameter Parameters which must be set for operating the system. This includes the
cushioning stage, the amplification stage and the system parameters.
PLC, IPC Programmable logic controller/industrial PC
System parameter Characteristic value which describes both the system structure as well as the
features and components of the drive used.
Teach procedure In the Teach procedure, the SPC11 checks the set parameters, learns the
position of the mechanical fixed stops as well as various characteristic system
values and saves these in the integrated EEPROM.