Festo Контроллер крайних положений SPC11 - Manual (Page 23)

1. Summary of components
1−11
Festo P.BE−SPC11−DSMI−EN en 0910b
1
2
1
Drive shaft positioned vertically downwards
2
Drive shaft positioned vertically upwards
Fig. 1/5: Horizontal fitting position
S Use fastening elements which will permanently resist the
acceleration forces.
S Avoid installing restrictors or non−return valves in the supĆ
ply line.
S Connect the drive and the load in the direction of moveĆ
ment free of play.
S For earthing, connect the earthing connection of the
DSMI−... and the earth connection of the SPC11 with low
impedance with an earthing band (short cable with large
cross−sectional area; see Fig. 1/1).