Muxlab HDMI 1x4 Distribution Hub - Manual (Page 9)

© MuxLab Inc. HDMI 1x4 Distribution Hub Installation Guide
Page 9
3.3. Pre-Installation Checklist
The HDMI 1x4 Distribution Hub provides a centralized
HDMI distribution center via copper UTP/STP cables.
1. The HDMI 1x4 Distribution Hub is used in
conjunction with MuxLab’s HDMI/IR Receiver
Balun (500407) and (optional) Transmitter Balun
(500406).
2. The HDMI 1x4 Distribution Hub is typically
installed in a remote telecom room and is connected
to the HDMI video source and display devices via
Cat 5e/6 UTP/STP cables. A MuxLab HDMI/IR
Transmitter or Receiver Balun is installed at each
HDMI device to support the connection to the Hub
via Cat 5e/6 cables.