Muxlab Component Video/Analog Audio Wall Plate Balun, US - Manual

© MuxLab Inc. 2010 94-000680-A SE-000680-A
8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5
Tel: (514) 905-0588 Fax: (514) 905-0589
Toll Free (North America): (877) 689-5228
E-mail: [email protected] URL: www.muxlab.com
Specifications
Environment Component Video (YPbPr), RGB Video (sync on green). 480i/p, 720p,
1080i/p. Line level analog audio.
Devices DVD players, satellite receivers, plasma displays, projectors, monitors,
up-converters, amplifiers, switchers, home theatre and other equipment
supporting HDTV component video and/or analog audio.
Transmission Transparent to the user
Bandwidth Video: 60 MHz, 3 dB roll off
Analog audio: 20 Hz to 20 kHz
Maximum Input 1.1 Vp-p
Insertion Loss per Pair
(Video) 0.1 dB for 0.1 MHz
Gradually increasing to 3.0 dB over the frequency range
Insertion Loss per Pair
(Audio) Less than 2 dB per pair over the frequency range
Return Loss (Video) Greater than 15 dB over the frequency range
Common Mode Rejection
Ratio (Video) -55 dB max.
Common Mode Rejection
Ratio (Audio) Greater than 60 dB at 1 kHz
Greater than 40 dB over the frequency and distance range
Max. Distance Color via
Cat 5E/6 UTP/STP Cable 480i/p: 1,000 ft (305 m)
720p and 1080i: 500 ft (152 m)
Analog Audio: 3,250 ft (990 m)
Cable:
Cat 5E/6 UTP/STP 24 AWG or lower solid copper twisted pair wire
Impedance: 100 ohms at 1 MHz
Maximum capacitance: 20 pf/ft
Attenuation: 6.6 dB/1,000 ft at 1 MHz
Cable: Coax Impedance: 75 ohms at 1 MHz
Connectors Three RCA-F connectors: Green (Y), Blue (Pb), Red (Pr)
One (1) RCA-F connector for analog audio
RJ45S for twisted pair
Pin Configuration
Reverse polarity sensitive Red (Pr): Pins 7(R) & 8(T) Green (Y): Pins 3(R) & 6(T)
Blue (Pb): Pins 1(R) & 2(T) Analog Audio: Pins 4(R) & 5(T)
Temperature Operating: 0° to 55°C
Storage: -20° to 85°C
Humidity: Up to 95% non-condensing
Enclosure ABS fire retardant plastic, Color white, Finish glossy.
Dimensions 86 mm x 86 mm x 36 mm. Choose 40 mm deep back box to allow
for Cat 5E/6 wiring connection.
Weight 4.1 oz (115 g)
Regulatory FCC, CE, RoHS, European Standard for 86 mm faceplate
Warranty Lifetime
Order Information 500053-WP-US Component Video / Analog Audio Wall Balun
UPC: 6-27699-91053-5
Component Video/Analog Audio Wall Balun
500053-WP-US
Quick Installation Guide
Overview
The Component Video/Analog Audio Wall Balun (500053-WP-US) allows one component
video (YPbPr or RGB) signal and one Analog Audio signal to be transmitted via a cost-
effective unshielded twisted pair (UTP) cable. Used in pairs, or in conjunction with the
500048 or 500049, the Component Video/Analog Audio Wall Balun supports 480i/p, 720p
and 1080i/p resolution for hi-definition (HDTV) video applications. The product allows four
coaxial cables to be replaced by one Category 5E/6 twisted pair cable allowing standard
structured cabling techniques to be used for more efficient cabling.
Installation
One (1) pair of baluns is needed to complete one component (YPbPr/RGB) connection
via Cat 5E/6 twisted pair. To install the baluns, perform the following steps:
1. Identify the pin configuration of the baluns.
Three (3) twisted pairs are required for video
and one (1) twisted pair is required for optional
analog audio. The pin configuration follows the
EIA/TIA 568A/B standard. The Component
Video/Analog Audio Balun is reverse polarity
sensitive. Please ensure that wiring is straight-
through (Ring to Ring, Tip to Tip).