Muxlab HDMI 1x4 Distribution Hub - Manual (Page 17)

© MuxLab Inc. HDMI 1x4 Distribution Hub Installation Guide
Page 17
EDID Settings and Color Depth
By setting the EDID selector to Position 1 (or by setting
the EDID selector to Position 3 and placing a non-Deep
Color display device on the copy port), the user disables
Deep Color. This will allow for greater distances via
UTP/STP cables.
Regardless of color depth mode, a display device will
always receive the highest color depth signal it can
support. This means that if the source delivers a color
signal of 10 bits per color or higher, a Deep Color
display will receive the signal unchanged, while a non-
Deep Color display will receive a normal 8-bit signal.
This is transparent to the user.