Muxlab Component Video/Analog Audio Balun - Manual

8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5
Tel: (514) 905-0588 Fax: (514) 905-0589
Toll Free (North America): (877) 689-5228
E-mail: [email protected] URL: www.muxlab.com
© MuxLab Inc. 94-000613-B SE-000597-B
Specifications
Environment Component Video (YPbPr), RGB Video (sync on green). 480i/p, 720p,
1080i/p. Line level analog audio.
Devices DVD players, satellite receivers, plasma displays, projectors, monitors, up-
converters, amplifiers, switchers, home theatre and other equipment
supporting HDTV component video and/or analog audio.
Transmission Transparent to the user
Bandwidth Video: 60 MHz, 3 dB roll off
Analog audio: 20 Hz to 20 kHz
Maximum Input 1.1 Vp-p
Insertion Loss per Pair
(Video) 0.1 dB for 0.1 MHz
Gradually increasing to 3.0 dB over the frequency range
Insertion Loss per Pair
(Audio) Less than 2 dB per pair over the frequency range
Return Loss (Video) Greater than 15 dB over the frequency range
Common Mode Rejection
Ratio (Video) -55 dB max.
Common Mode Rejection
Ratio (Audio) Greater than 60 dB at 1 kHz
Greater than 40 dB over the frequency and distance range
Max. Distance Color via
Cat 5E/6 UTP/STP Cable 480i/p: 1,000 ft (305 m)
720p and 1080i: 500 ft (152 m)
Analog Audio: 3,250 ft (990 m)
Cable:
Cat 5E/6 UTP/STP 24 AWG or lower solid copper twisted pair wire
Impedance: 100 ohms at 1 MHz
Maximum capacitance: 20 pf/ft
Attenuation: 6.6 dB/1,000 ft at 1 MHz
Cable: Coax Impedance: 75 ohms at 1 MHz
Connectors Three (3) high quality color-code BNC (RCA) leads (12”)
One (1) RCA-F for analog audio
One (1) Ethercon receptacle for Cat5e/6
Pin Configuration
Reverse polarity sensitive Red (Pr): Pins 7(R) & 8(T) Green (Y): Pins 3(R) & 6(T)
Blue (Pb): Pins 1(R) & 2(T) Analog Audio: Pins 4(R) & 5(T)
Temperature Operating: 0° to 55°C
Storage: -20° to 85°C
Humidity: Up to 95% non-condensing
Enclosure ALUMINUM 6061-T6
Dimensions 2.75” x 2.64” x 1.975” (6.99cm x 6.71cm x 5.02cm)
Weight .542lb (245.85g)
Regulatory FCC, CE, RoHS
Warranty Lifetime
Order Information 500052-PRO-BNC Component Video/Analog Audio ProAV Balun, BNC
500052-PRO-RCA Component Video/Analog Audio ProAV Balun, RCA
Component Video / Analog Audio ProAV Balun
Quick Installation Guide
Overview
The Component Video/Analog Audio ProAv BNC Balun (500052-PRO-BNC) and its
RCA version: the Component Video/Analog Audio ProAv RCA Balun (500052-PRO-
RCA), allow one component video (YPbPr or RGB) signal and one Analog Audio
signal to be transmitted via a cost-effective unshielded twisted pair (UTP) cable.
The 500052-Pro-BNC and the 500052-Pro-RCA feature Ethercon  RJ45, ruggedized
cast aluminum enclosure and built-in 12-inch (30cm) heavy duty AV cable leads for the
demanding professional environment. They may be used in pairs or in conjunction with
other MuxLab component video baluns.
Used in pairs, the Component Video/Analog Audio ProAv BNC Balun (or the
Component Video/Analog Audio ProAv RCA Balun) supports 480i/p, 720p and 1080i/p
resolution for hi-definition (HDTV) video applications.
Installation
One (1) pair of baluns is needed to complete one component (YPbPr/RGB) connection
via Cat 5E/6 twisted pair. To install the baluns, perform the following steps:
1. Identify the pin configuration of the baluns. Three (3) twisted pairs are required for
video and one (1) twisted pair is required for optional analog audio. The pin
configuration follows the EIA/TIA 568A/B standard. The Component
Video/Analog Audio Balun is reverse polarity sensitive. Please ensure that wiring