Muxlab Stereo Audio-Video Balun - Manual

8495 Dalton Road, Montreal, Quebec, Canada. H4T 1V5
Tel: (514) 905-0588 Fax: (514) 905-0589
Toll Free (North America): (877) 689-5228
E-mail: [email protected] URL: www.muxlab.com
© MuxLab Inc. 2010 94-000231-G SE-000115-G
Specifications
Environment Composite video and unbalanced audio for the consumer and
commercial market.
Devices DVD, VCR, camcorders, audio receivers, audio amplifiers, AV
switchers, splitters, AV mixers and other analogue audio-video
equipment featuring coaxial input or output with BNC or RCA
connectors.
Transmission Transparent to the user
Video Audio
Bandwidth DC to 8 MHz 20 Hz to 20 kHz
Peripherals’ impedance 75 ohms Source 100 Ω Max, Receiver 10 kΩ min.
Maximum Voltage Input 1.1 Vp-p 1.1 Vp-p
THD NA Less then 0.007% @ 1 kHz
Insertion Loss Less than 2 dB per
pair Less than 2 dB per pair
Return Loss Better than 15 dB NA
Common Mode Rejection
Ratio (CMRR) Greater than 40 dB NA
Max. Distance Cat5e/6: 2,200 ft Cat5e/6: 3250 ft
Cable:
Cat5e/6 UTP/STP 24 AWG or lower solid copper twisted pair wire
Impedance: 100 ohms at 1 MHz
Maximum capacitance: 20 pf/ft
Attenuation: 6.6 dB/1,000 ft at 1 MHz
Cable: RCA Standard audio cable terminated by RCA connectors
Cable: BNC 75-ohm coaxial cable
Connectors One (1) BNC-receptacle (includes 9” coax jumper cable)
Two (2) RCA-receptacles
One (1) RJ45 jack
Pin Configuration Video: Pins 7(R) & 8(T)
Audio 1: Pins 1(R) & 2(T)
Audio 2: Pins 3(R) & 6(T)
Temperature Operating: 0° to 55°C
Storage: -20° to 85°C
Humidity: Up to 95% non-condensing
Enclosure Fire retardant plastic
Dimensions 2.40” x 2.25” x 1.00” (6.10 x 5.72 x 2.54 cm)
Weight 4.25 oz (121 g)
Warranty Lifetime
Order Information 500001 Stereo Audio-Video Balun
Stereo Audio-Video Balun
500001
Quick Installation Guide
Overview
The Stereo Audio-Video Balun allows the transmission of composite baseband video
signals and audio signals via unshielded twisted pair (UTP) cables in a Structured
Cabling System. The Stereo Audio/Video Balun is used in pairs to transmit standard
NTSC, SECAM and PAL composite video. It converts a composite baseband video
(75 ohms) and stereo-audio signal from coax to UTP.
The Stereo Audio-Video Balun is connected to the structured cabling via a modular wall
jack in the work area. It is equipped with a BNC 75-ohm connector and two standard
RCA phono jacks at one end and a RJ45 jack at the other end. The 500001 has a
20 Hz- 20 kHz bandwidth for high fidelity applications.
Applications
The Stereo Audio-Video Balun is designed for use with CCTV cameras, monitors,
DVR, DVD players, cableboxes, AVR, video-conferencing, camcorders and other
composite video/audio equipment. Applications include: security/surveillance
monitoring, video bulletin boards, financial information services, news services,
education, video training, airport displays, video capture, stock exchange, hotels and
convention centers.