Physical installation – Muxlab HDMI 1x4 Distribution Hub User Manual

Page 10

Text mode
Original mode

© MuxLab Inc.

HDMI 1x4 Distribution Hub Installation Guide

Page 10

3.4. Physical

Installation

MuxLab’s HDMI 1x4 Distribution Hub comes with
mounting brackets for standard 19” rack mounting.
Select the final destination for the product and install the
unit using standard rack-mount screws.

For set-top installation, the L-brackets on the side of the
unit may be removed and the included rubber feet
placed on the bottom of the unit. When removing the L-
brackets, be careful to keep and reinstall the four screws
on each side of the unit.

Figure 3: Procedure for Set-Top Installation