Muxlab HDMI 1x4 Distribution Hub - Manual (Page 15)

© MuxLab Inc. HDMI 1x4 Distribution Hub Installation Guide
Page 15
Position 1: HDMI 1.2
 HDMI 1.2 Profile.
 Maximum resolution: 1080i.
 Supported color depth: 8 bits per color.
 Setting is most compatible with all display devices that
support HDMI 1.2 or better.
 Disables Deep Color (affects all display devices).
 Prevents an HDMI source from auto-negotiating a
resolution higher than 1080i.
 Supports most display devices on the market.
Position 2: HDMI 1.3
 HDMI 1.3 Profile.
 Maximum resolution: 1080p.
 Supported color depth: 8, 10, or 12 bits per color.
 HDMI source will auto-negotiate to resolution of 1080p.
 Display devices that do not support 1080p will not work
at this resolution.
Position 3: Copy EDID
 Copies the EDID setting from the first display device in
the chain.
 Port priority is UTP/STP Outputs first (1, 2, 3, 4) THEN
Local Monitor Output.
 The user must place the lowest resolution display device
on the copy port. All other displays will follow.
 As with Position 1, this does not prevent the user from
manually selecting a resolution which a display device
does not support.
 For the copy to take place, a display device must be
plugged in when the Distribution Hub is powered up.
Failure to do so will result in no display device working.