Muxlab Active VGA Managed System - Manual (Page 4)

© MuxLab Inc. Active VGA Managed Dispatcher Installation Guide
Page 4
1.
System Overview
1.1. Description
MuxLab’s family of Active VGA Managed products
allows a single video source to be transmitted to various
remote locations in a point-to-multipoint configuration
for cost-efficient connectivity.
The Active VGA Managed family consists of three
products:
(1) Active VGA Managed Dispatcher
(2) Active VGA Managed Receiver
(3) Active VGA Managed Repeater Hub
A video source is connected to the Dispatcher, which in
turn distributes the source signal to Receivers placed in
locations as far as 1,000 feet (305 meters) away. Each
Receiver then transmits this signal to as many as two
display devices. Working alone, the Dispatcher (8 or 16
port) can distribute signals to as many as 8 or 16 remote
locations.
A Repeater Hub is used whenever a source signal must
be distributed to more than 8 or 16 remote locations, or
over a distance of more than 1,000 feet. The Repeater
Hub receives the source signal from the Dispatcher,
amplifies and equalizes it, and then distributes it to as
many as 8 Receivers located as far as 1,000 feet away.