Muxlab Active VGA Managed System - Manual (Page 14)

© MuxLab Inc. Active VGA Managed Dispatcher Installation Guide
Page 14
3.4. Physical Installation
MuxLab’s Active VGA Managed Dispatcher comes
with mounting brackets for standard 19” rack mounting.
Select the final destination for the product and install the
unit using standard rack-mount screws.
For set-top installation, the L-brackets on the side of the
unit may be removed and the included rubber feet placed
on the bottom of the unit. When removing the L-
brackets, be careful to keep and reinstall the four screws
on each side of the unit.
Figure 4: Procedure for Set-Top Installation