Muxlab Active VGA Audio Balun Kit - Manual (Page 15)

© MuxLab Inc. Active VGA/Audio Balun Kit Installation Guide
Page 15
19. The following table provides suggested rotary
switch settings for adjusting picture brightness.
Brightness Setting Actual Gain
Less -25%
None 0%
Medium 25%
High 50%
Table 1: Rotary Switch Settings for Brightness
Adjustment
20. To adjust picture sharpness, begin with the
sharpness potentiometer (“Sharp”) rotated
completely counterclockwise, and slowly rotate it in
the clockwise direction until picture details become
clear.
Note: For display equipment with automatic brightness control
(for example, certain models of projectors), complete all
installation procedures and ensure that the brightness rotary
switch (“Bright”) is set to “None” and the sharpness
potentiometer (“Sharp”) is rotated completely counterclockwise
before turning the display equipment on. Otherwise, the display
could override the brightness adjustment feature of the Active
VGA/Audio Balun Kit.