Muxlab Active VGA Audio Balun Kit - Manual (Page 10)

© MuxLab Inc. Active VGA/Audio Balun Kit Installation Guide
Page 10
3.3. Pre-Installation Checklist
There are two (2) components that must be verified
before installation can begin: The transmitter and the
receiver.
1. The transmitter is connected to the VGA video
source, usually a PC or Laptop computer, via VGA
video & audio cables (not included).
2. The transmitter is connected to the receiver by a Cat
5e/6 (or higher) unshielded twisted pair cable (not
included).
3. The receiver is connected to the display equipment,
usually a projector or screen, via VGA video &
audio cables (not included).
4. Verify that the desired image resolution is within the
specifications of the Active VGA/Audio Balun Kit.