beautypg.com

Muxlab Active VGA Audio Balun Kit User Manual

Page 12

background image

© MuxLab Inc.

Active VGA/Audio Balun Kit Installation Guide

Page 12

5. Connect a length of Cat 5e/6 (or higher) UTP cable

to the transmitter. Ensure that the wiring is in
accordance with EIA-568A or EIA-568B standards
and is straight-through.

Figure 3: Wiring Configuration

6. Connect the 12 VDC power supply to the

transmitter.

7. Plug the power supply into an AC power outlet. If

power is present, the green power LED will be ON.