Featherboard construction – SawStop ICS73600 User Manual
Page 82
80
SawStop 10” Industrial Cabinet Saw
Featherboard Construction
This diagram illustrates a typical featherboard. Featherboards should be constructed from good quality wood that is free of knots. Use Featherboards to help keep the material being cut in contact with the table, and to help prevent kickback. Do not use featherboards when cutting with the miter gauge.
1 inch squares.
Featherboard should be approximately
3
/
4
inch thick.
7 3/4"
4"
24"
1/4"
1/8"
60°